Blog

Oct 25 2026

Where to Buy Quartz Slabs Near Me in Tyler, TX: How to See, Compare, and Choose the Right Slab

Quartz is still the countertop material homeowners pick most often. The 2026 U.S. Houzz Kitchen Trends Study, which surveyed 1,780 homeowners, found engineered quartz was chosen for 32% of new or upgraded countertops, ahead of granite and quartzite.

That popularity cuts both ways. More colors and patterns mean more choice, and more chances to pick a slab online that looks different once it is in your kitchen. For homeowners in Tyler, Longview, and the rest of East Texas, the surest way to buy quartz is to see it in person at a local showroom and talk with the people who will install it.

Why Photos and Small Samples Only Get You Partway

Our quartz countertop page shows hundreds of colors, and we tell people plainly that colors and veining can vary from what you see on a screen. A four-inch sample is useful for checking color and finish. It cannot show how a vein travels across ten feet of countertop or how it lands on an island.

That matters more than it used to. The same Houzz study found 75% of renovating homeowners chose a veined countertop pattern. With veined quartz, the slab you pick and the way it is laid out decide how the finished kitchen reads.

What to Bring to Our Tyler Showroom

Our 6,000 sq. ft. showroom on State Hwy 155 S. lets you look at quartz next to granite, quartzite, marble, and porcelain, so you can compare materials side by side instead of guessing. We are open Monday through Friday, 8:00 AM to 4:30 PM.

Bring a cabinet door or a photo of your cabinet finish, a flooring sample, your backsplash tile if it is already picked, and rough measurements or a sketch of the layout. Photos of your kitchen at different times of day help us steer you toward colors that will hold up in your light.

Pro Tip: Showroom lighting is bright and even. Kitchens are not. Hold your cabinet door against the quartz you like, then take a photo near a window or doorway with natural light. Warm whites and creams often look noticeably different in East Texas afternoon sun than under overhead lights.

We Do A Fantastic Job!

Wondering Where to Buy Quartz Slabs Near You in Tyler? Visit Ashcraft Granite & Marble

Shopping for quartz slabs in East Texas? Learn what to check in person, how to compare slabs, and why buying through a local installer in Tyler pays off.

What to Look for on a Quartz Slab

Veining direction and scale. Large, dramatic veins look best on long, uninterrupted runs. Smaller, busier patterns are more forgiving on L-shaped and U-shaped layouts with several pieces.

Where the seams will fall. Most kitchens need at least one seam. Ask where it will land and how the veining will meet at that joint before you commit.

The edge. On some quartz designs the pattern shows less on a cut edge than on the top. Ask to see a finished edge on the color you like, especially if you want a thicker look or a waterfall end.

Pro Tip: If your kitchen needs more than one slab, ask that every slab come from the same production lot. Engineered stone is consistent, but color can shift slightly from one run to the next, and two lots side by side at a seam is where that shift shows.

Pro Tip: On veined quartz, ask how the seam will be placed relative to the vein flow. A seam that runs with the veins is far less noticeable than one that cuts across them, and that decision is made on paper before any slab is cut.

Why Buying Through Your Installer Matters

A quartz slab is only half the job. It still has to be measured to your cabinets, cut for the sink and cooktop, edged, seamed, and set level. When the company that helps you choose the slab is also the company that installs it, the person at the showroom already knows how your layout will use that slab.

That saves you from a common problem: buying material on your own, then learning it is the wrong size, the wrong lot, or a pattern that does not work with your seam locations. It also gives you one point of contact from selection through install day.

Quartz is non-porous and does not need sealing, which is a big reason people choose it. That low-upkeep advantage only pays off when the slab is chosen and laid out correctly. You can read more about how we work in our history serving East Texas since 1977, and see finished work in our project gallery.

Ready to See Quartz Slabs in Person?

If you are searching for where to buy quartz slabs near you, start with a visit to Ashcraft Granite & Marble in Tyler. Bring your samples and your questions, and we will help you compare colors, check how the pattern works with your layout, and plan your quartz countertop installation from there.

Contact our team to plan your showroom visit, or request a free quote and tell us about your project.

Sep 24 2026

What’s More Expensive, Quartz or Granite? A Tyler, TX Cost Breakdown Before You Buy

This is the question we field most often at our showroom on State Highway 155. A homeowner has narrowed the kitchen down to two materials, and they want to know which one is going to cost more before they fall in love with a slab.

The honest answer is that the two ranges overlap heavily. The material you pick matters less than the specific slab, the size of your kitchen, and what your layout asks the fabricator to do.

Preference does lean one direction. In the 2025 U.S. Houzz Kitchen Trends Study, 39 percent of renovating homeowners chose engineered quartz and 19 percent chose granite, with quartzite at 11 percent. Popularity and price are two different things, though, and plenty of granite slabs cost more than plenty of quartz.

Why Quartz and Granite Pricing Overlap

Granite is a natural stone. Its price is set by how rare the block was, how far it traveled, how much movement and color the slab carries, and how much of it a quarry can actually produce. A common speckled granite and an exotic granite with dramatic veining can sit thousands of dollars apart in the same yard.

Quartz is manufactured, so its pricing is tiered by the brand and the series. Entry level quartz in a simple, uniform pattern is often less than a mid grade granite. A high end marble look quartz with a complex vein structure can land above it.

That is why we stopped answering the question in the abstract. We answer it by pulling both slabs for you in person.

Pro Tip: Ask which group or tier a slab falls into before you get attached to it. Most yards and quartz brands price by group, and moving down one group on a similar looking stone frequently saves more than shrinking your island by a few inches.

We Do A Fantastic Job!

Trying to Decide Between Quartz or Granite for Your Tyler Kitchen? Let's Price Your Actual Layout.

Send us your measurements and we will walk you through both options with real numbers. Request a free quote or call our Tyler showroom at (903) 581-5501.

What Drives the Number More Than the Material

Square footage is the obvious one, but it is not the one that surprises people. These are the factors that quietly move a quote in either direction:

Slab yield. A kitchen that needs 52 square feet does not automatically fit on one slab. Vein direction, seam placement, and the shape of your island can force a second slab, and a second slab is a step change in cost, not a small increase.

Edge profile. An eased or straight edge is standard. Ogee, mitered, and built up edges add labor and, in the case of a mitered edge, extra material.

Cutouts and finished work. Undermount sinks, cooktops, faucet holes, and a polished finish on an exposed end all add fabrication time.

Tear out and install conditions. Removing an old tile or laminate top, working around a plumbing relocation, or carrying a large island piece into a tight East Texas floor plan all factor in.

Pro Tip: If you want the visual impact of a heavy slab without paying for 3cm everywhere, ask about a mitered edge on the island only. You get the thick look where people actually see it and standard thickness on the perimeter.

The Long Term Cost Nobody Quotes You

Granite is porous and takes a sealer. Quartz does not. For some homeowners that is a real difference in how they want to live with the surface, and it belongs in the comparison alongside the install price.

Neither material is fragile. Both handle a working Tyler kitchen for decades when they are fabricated and installed correctly. The bigger long term risk is a bad seam or an unsupported overhang, and that comes down to the fabricator, not the material.

It is worth keeping the money in perspective. The 2026 Cost vs. Value Report put the national average minor kitchen remodel at $28,458 with an estimated $32,141 added at resale, roughly 113 percent recouped. Countertops are one line inside that project, and the difference between two materials is usually a fraction of it.

How to Compare Two Quotes Fairly

Get both numbers written as a full installed price for your actual layout. A price per square foot on a slab tells you almost nothing until template, fabrication, edge work, cutouts, tear out, and installation are included.

Then check that both quotes assume the same edge profile, the same sink type, and the same number of slabs. If one quote is noticeably lower, that is almost always where the difference is hiding.

We would rather show you. Our 6,000 square foot showroom lets you stand in front of granite and quartz at the same time, with quartzite and marble nearby if the comparison opens up. Photos on a screen flatten the depth and the sheen, and those are exactly the qualities people are paying for.

Let’s Price Your Kitchen, Not a Hypothetical One

Ashcraft Granite & Marble has been fabricating and installing stone across East Texas since 1977. We serve homeowners, builders, and commercial projects from our Tyler location, and we will give you a straight comparison rather than a push toward one material.

Bring your measurements or your cabinet plan and we will build both quotes. Browse our recent projects to see how each material reads in a finished kitchen, then contact our team or call (903) 581-5501 to get started.

Jul 20 2026

Best Quartz Countertop Installers Near Tyler, Longview, and East Texas Homes

Quartz has become one of the most requested countertops in East Texas, and for good reason. It is hard, low maintenance, and available in colors that fit nearly any kitchen or bath.

But the material is only half the job. The installer you choose decides whether your quartz looks right and holds up, so it pays to vet them carefully.

Here is what we tell homeowners, designers, and builders across Tyler and Longview when they are deciding who to hire.

Why Quartz Is Worth It

Quartz is an engineered stone, which makes it non-porous and highly resistant to stains and scratches. Unlike natural stone, it does not need sealing.

That low upkeep is a big part of why families, rental owners, and commercial builders reach for it. Pick the right color and it fits almost any space.

Quartz also stays consistent slab to slab, which helps on larger projects where you want several counters to match closely.

Pro tip: Quartz is durable but not heatproof. Plan for trivets near the cooktop, and tell your installer how you cook so they can suggest the right color and finish.

Look for In-House Fabrication

The best installers fabricate in their own shop rather than shipping your slab elsewhere. In-house work means tighter quality control and faster turnaround.

It also means one team stays accountable from template to install, so nothing gets lost between vendors.

Pro tip: Ask directly whether the company fabricates on site. If they outsource the cutting, you have less control over both timing and quality.

Ask About Templating and Seams

An accurate measurement is where a quality job starts. Digital templating captures your exact layout, so the finished counters sit clean against walls and cabinets.

Seam placement matters just as much. A skilled installer plans seams where they are least visible and where the pattern lines up.

Pro tip: Ask to see where the seams will fall before fabrication begins. A good installer walks you through the plan instead of surprising you on install day.

We Do A Fantastic Job!

How Do You Find the Best Quartz Countertop Installers in East Texas?

The right installer handles everything from templating to the final seam, so the work looks right and lasts for years. We have served Tyler, Longview, and the surrounding area since 1977.

Check the Portfolio and Reviews

Any installer worth hiring can show you finished work. Look through recent projects for clean edges, tight seams, and even polish across the surface.

Reviews from local homeowners tell you about reliability, communication, and how the company handles a problem when one comes up.

Pro tip: Look through our gallery and read reviews from other East Texas clients before you decide. Real projects reveal more than any brochure.

Ask About Warranty and Timeline

Before you sign, get the details in writing. A clear quote should spell out the material, the edge profile, the number of seams, and the install date.

Ask what happens if something chips or the fit is off after install. Established installers back their work and make it right.

Pro tip: Get at least a rough timeline up front. Reliable shops can tell you how long fabrication and install will take, and they hit the dates they give you.

Why Local East Texas Experience Matters

A local installer knows the area, shows up on schedule, and stands behind the work long after install day. That is hard to get from a distant big-box service.

We have worked in Tyler, Longview, and the surrounding communities since 1977, and our 6,000 square foot showroom lets you see full slabs in person before you commit to anything.

Pro tip: Visit the showroom in person. Seeing and touching the actual quartz beats choosing from a small chip or a screen every time.

Ready to Start Your Quartz Project?

The right quartz and the right installer turn a kitchen or bath into something you will enjoy for years. Our team handles every step, from selection and templating to a clean, precise install.

Come visit our Tyler showroom, browse full slabs, and talk through your project with people who have done this for decades. Contact Ashcraft Granite & Marble or request a free quote today, and let’s build countertops worth coming home to.

Jun 15 2026

How to Find the Best Price for Granite Countertops Near You Without Sacrificing Quality

If you are shopping for granite countertops in Tyler, TX, it is easy to get pulled toward the cheapest number first.

That is understandable. A countertop project is a real investment, and most homeowners, designers, and builders want to stay on budget.

But the best price and the lowest price are not always the same thing.

When we talk with customers, we usually find that what they really want is value. They want a fair price, clear communication, a solid installation, and a finished countertop that looks right in the space. That is a better goal than chasing the smallest quote and hoping the details work out later.

Start by Comparing What Is Actually Included

One of the biggest mistakes people make is comparing quotes that are not built the same way.

A lower number may leave out parts of the project that matter, such as cutouts, edge details, delivery, tear-out, or installation. Another quote may include more of the real work from the start, which makes it look higher at first even though it may be the better deal.

That is why we recommend asking every fabricator the same questions. Does the quote include measuring? How many sink cutouts are included? What edge profile is covered? Is installation part of the number, or is it separate?

When the scope is clear, the price becomes easier to judge.

Look Beyond Square Foot Pricing

Granite is not a product you pull off a shelf and drop into place.

Every kitchen or bath has its own layout, sink placement, appliance clearances, overhangs, seam planning, and edge work. That means the final price depends on more than square footage alone.